Disassembly and Assembly canon copier

Be sure to observe the following when disassembling or assembling the machine:
1.
 Disconnect the power plug of the host machine before starting the work.
2. Unless otherwise noted, assemble the machine by reversing the steps used to disassemble
it.
3. Identify the screws by type (length, diameter) and location.
4. Some mounting screws are equipped with a toothed washer to protect against static electricity.
Be sure to use each washer.
5. As a rule, do not operate the machine while any of its parts are removed.
6.
 If the deck is equipped with a drier heater, be sure to disconnect the power plug of
the heater before starting the work.
by canon copier service

special features canon imge runner copiers

Two-Page Separation

Use it to copy left and right pages (as of an open book)
on separate sheets by a single operation.

Transparency Interleaving
Use it to insert a sheet of paper between transparencies
in transparency mode.

Shift
Use it to move the entire original image to the center
or a corner.

Cover/Sheet Insertion

Use it to print on a sheet of a type different from the one
used for the body to serve as a front/back/chapter cover.

 Different Size Originals

Use it to copy originals of different sizes
(different horizontal lengths or different sizes) on sheets
of corresponding sizes.


 Margin
Use it to create a margin on the edge of a copy for binding.


by canon copier service







Frame Erase

Use it to erase the image of the frame or holes of an
original from its copy.

Image Combination

Use it to reduce 2, 4, or 8 originals automatically to
print on a single sheet.





Image Separation

Use it to enlarge a single original automatically by
dividing it into 2 or 4 to print on a sheet of a selected size.



Nega/Posi
Use it to reverse the black and white areas of the original
on its copies.























Sharpness

Use it to increase the black-and-white contrast of an
original on its copies.

Mode Memory

Use it to store or recall a copying mode.

Recall

Use it to call as many as three stored copying modes.





Booklet

Use it to copy single- or double-sided originals in such
a way to enable making a booklet.

Image Repeat
Use it to repeat an image of the original vertically/
horizontally as many times as specified (until the sheet is full).

Mirror Image

Use it to make a mirror image of an image of the original.

Job build

Use it to copy separately placed sets of originals at once.

Extra-Length

Use it when making copies of an original of a non-default
length (manual feed mode; needs selection in service mode:
COPIER>OPTION>USER>MF-LG-ST).