The fixing system is constructed of the following components:
Fixing upper roller Heat roller (50-mm dia.)
Fixing lower roller Pressure roller (38-mm dia.)
Fixing motor M19 24VDC
Fixing assembly inlet SL1 24VDC
guide drive solenoid
Main heater H1 120/230-V model: 600 W
100-V model: 700 W
Sub heater H2 120/230-V model: 600 W
100-model: 470 W
Main thermistor TH1 Used for temperature control, error detection
Sub thermistor TH2 Used for error detection
Thermal switch TP1 Operates at 240 ±10°C
Cleaning web • Driven by web drive solenoid (SL2)
• For large-size paper (B4 or larger), turns on twice
for the 1st sheet, and then once for the 2nd and 3rd
sheets; repeats the sequence thereafter
• For small-size paper (smaller than B4), turns on
once for the 1st and 2nd sheets, and remains off for
the 3rd sheet; repeats the sequence thereafter
Upper separation claw Moves in reciprocating motions (about 3 mm)
Moves up/down (about 1.8 mm)
No comments:
Post a Comment